Tractography Clustering - Available Features

This page lists available features that can be used by the tractography clustering framework. For every feature a brief description is provided explaining: what it does, when it’s useful and how to use it. If you are not familiar with the tractography clustering framework, read the Clustering framework first.

Note: All examples assume a function get_streamlines exists. We defined here a simple function to do so. It imports the necessary modules and load a small streamline bundle.

def get_streamlines():
from dipy.data import get_fnames
from dipy.tracking.streamline import Streamlines

fname = get_fnames('fornix')
bbox_valid_check=False).streamlines

streamlines = Streamlines(fornix)
return streamlines


Identity Feature

What: Instances of IdentityFeature simply return the streamlines unaltered. In other words the features are the original data.

When: The QuickBundles algorithm requires streamlines to have the same number of points. If this is the case for your streamlines, you can tell QuickBundles to not perform resampling (see following example). The clustering should be faster than using the default behaviour of QuickBundles since it will require less computation (i.e. no resampling). However, it highly depends on the number of points streamlines have. By default, QuickBundles resamples streamlines so that they have 12 points each [Garyfallidis12].

Unless stated otherwise, it is the default feature used by Metric objects in the clustering framework.

from dipy.segment.clustering import QuickBundles
from dipy.segment.metric import IdentityFeature
from dipy.segment.metric import AveragePointwiseEuclideanMetric

# Get some streamlines.
streamlines = get_streamlines()  # Previously defined.

# Make sure our streamlines have the same number of points.
from dipy.tracking.streamline import set_number_of_points
streamlines = set_number_of_points(streamlines, nb_points=12)

# Create an instance of IdentityFeature and tell metric to use it.
feature = IdentityFeature()
metric = AveragePointwiseEuclideanMetric(feature=feature)
qb = QuickBundles(threshold=10., metric=metric)
clusters = qb.cluster(streamlines)

print("Nb. clusters:", len(clusters))
print("Cluster sizes:", list(map(len, clusters)))

Nb. clusters: 4

Cluster sizes: [64, 191, 47, 1]


Resample Feature

What: Instances of ResampleFeature resample streamlines to a predetermined number of points. The resampling is done on the fly such that there are no permanent modifications made to your streamlines.

When: The QuickBundles algorithm requires streamlines to have the same number of points. By default, QuickBundles uses ResampleFeature to resample streamlines so that they have 12 points each [Garyfallidis12]. If you want to use a different number of points for the resampling, you should provide your own instance of ResampleFeature (see following example).

Note: Resampling streamlines has an impact on clustering results both in term of speed and quality. Setting the number of points too low will result in a loss of information about the shape of the streamlines. On the contrary, setting the number of points too high will slow down the clustering process.

from dipy.segment.clustering import QuickBundles
from dipy.segment.metric import ResampleFeature
from dipy.segment.metric import AveragePointwiseEuclideanMetric

# Get some streamlines.
streamlines = get_streamlines()  # Previously defined.

# Streamlines will be resampled to 24 points on the fly.
feature = ResampleFeature(nb_points=24)
metric = AveragePointwiseEuclideanMetric(feature=feature)  # a.k.a. MDF
qb = QuickBundles(threshold=10., metric=metric)
clusters = qb.cluster(streamlines)

print("Nb. clusters:", len(clusters))
print("Cluster sizes:", list(map(len, clusters)))

Nb. clusters: 4

Cluster sizes: [64, 191, 44, 1]


Center of Mass Feature

What: Instances of CenterOfMassFeature compute the center of mass (also known as center of gravity) of a set of points. This is achieved by taking the mean of every coordinate independently (for more information see the wiki page).

When: This feature can be useful when you only need information about the spatial position of a streamline.

Note: The computed center is not guaranteed to be an existing point in the streamline.

import numpy as np
from dipy.viz import window, actor
from dipy.segment.clustering import QuickBundles
from dipy.segment.metric import CenterOfMassFeature
from dipy.segment.metric import EuclideanMetric

# Enables/disables interactive visualization
interactive = False

# Get some streamlines.
streamlines = get_streamlines()  # Previously defined.

feature = CenterOfMassFeature()
metric = EuclideanMetric(feature)

qb = QuickBundles(threshold=5., metric=metric)
clusters = qb.cluster(streamlines)

# Extract feature of every streamline.
centers = np.asarray(list(map(feature.extract, streamlines)))

# Color each center of mass according to the cluster they belong to.
colormap = actor.create_colormap(np.arange(len(clusters)))
colormap_full = np.ones((len(streamlines), 3))
for cluster, color in zip(clusters, colormap):
colormap_full[cluster.indices] = color

# Visualization
scene = window.Scene()
scene.clear()
scene.SetBackground(0, 0, 0)
window.record(scene, n_frames=1, out_path='center_of_mass_feature.png',
size=(600, 600))
if interactive:
window.show(scene)


Showing the center of mass of each streamline and colored according to the QuickBundles results.

Midpoint Feature

What: Instances of MidpointFeature extract the middle point of a streamline. If there is an even number of points, the feature will then correspond to the point halfway between the two middle points.

When: This feature can be useful when you only need information about the spatial position of a streamline. This can also be an alternative to the CenterOfMassFeature if the point extracted must be on the streamline.

import numpy as np
from dipy.viz import window, actor
from dipy.segment.clustering import QuickBundles
from dipy.segment.metric import MidpointFeature
from dipy.segment.metric import EuclideanMetric

# Get some streamlines.
streamlines = get_streamlines()  # Previously defined.

feature = MidpointFeature()
metric = EuclideanMetric(feature)

qb = QuickBundles(threshold=5., metric=metric)
clusters = qb.cluster(streamlines)

# Extract feature of every streamline.
midpoints = np.asarray(list(map(feature.extract, streamlines)))

# Color each midpoint according to the cluster they belong to.
colormap = actor.create_colormap(np.arange(len(clusters)))
colormap_full = np.ones((len(streamlines), 3))
for cluster, color in zip(clusters, colormap):
colormap_full[cluster.indices] = color

# Visualization
scene = window.Scene()
scene.clear()
scene.SetBackground(0, 0, 0)
window.record(scene, n_frames=1, out_path='midpoint_feature.png',
size=(600, 600))
if interactive:
window.show(scene)


Showing the middle point of each streamline and colored according to the QuickBundles results.

ArcLength Feature

What: Instances of ArcLengthFeature compute the length of a streamline. More specifically, this feature corresponds to the sum of the lengths of every streamline segments.

When: This feature can be useful when you only need information about the length of a streamline.

import numpy as np
from dipy.viz import window, actor
from dipy.segment.clustering import QuickBundles
from dipy.segment.metric import ArcLengthFeature
from dipy.segment.metric import EuclideanMetric

# Get some streamlines.
streamlines = get_streamlines()  # Previously defined.

feature = ArcLengthFeature()
metric = EuclideanMetric(feature)
qb = QuickBundles(threshold=2., metric=metric)
clusters = qb.cluster(streamlines)

# Color each streamline according to the cluster they belong to.
colormap = actor.create_colormap(np.ravel(clusters.centroids))
colormap_full = np.ones((len(streamlines), 3))
for cluster, color in zip(clusters, colormap):
colormap_full[cluster.indices] = color

# Visualization
scene = window.Scene()
scene.clear()
scene.SetBackground(0, 0, 0)
window.record(scene, out_path='arclength_feature.png', size=(600, 600))
if interactive:
window.show(scene)


Showing the streamlines colored according to their length.

Vector Between Endpoints Feature

What: Instances of VectorOfEndpointsFeature extract the vector going from one extremity of the streamline to the other. In other words, this feature represents the vector beginning at the first point and ending at the last point of the streamlines.

When: This feature can be useful when you only need information about the orientation of a streamline.

Note: Since streamlines endpoints are ambiguous (e.g. the first point could be either the beginning or the end of the streamline), one must be careful when using this feature.

import numpy as np
from dipy.viz import window, actor
from dipy.segment.clustering import QuickBundles
from dipy.segment.metric import VectorOfEndpointsFeature
from dipy.segment.metric import CosineMetric

# Get some streamlines.
streamlines = get_streamlines()  # Previously defined.

feature = VectorOfEndpointsFeature()
metric = CosineMetric(feature)
qb = QuickBundles(threshold=0.1, metric=metric)
clusters = qb.cluster(streamlines)

# Color each streamline according to the cluster they belong to.
colormap = actor.create_colormap(np.arange(len(clusters)))
colormap_full = np.ones((len(streamlines), 3))
for cluster, color in zip(clusters, colormap):
colormap_full[cluster.indices] = color

# Visualization
scene = window.Scene()
scene.clear()
scene.SetBackground(0, 0, 0)
window.record(scene, out_path='vector_of_endpoints_feature.png',
size=(600, 600))
if interactive:
window.show(scene)


Showing the streamlines colored according to their orientation.

Garyfallidis12(1,2)

Garyfallidis E. et al., QuickBundles a method for tractography simplification, Frontiers in Neuroscience, vol 6, no 175, 2012.

Example source code

You can download the full source code of this example. This same script is also included in the dipy source distribution under the doc/examples/ directory.