This example shows how to use Constrained Spherical Deconvolution (CSD) introduced by Tournier et al. [Tournier2007].
This method is mainly useful with datasets with gradient directions acquired on a spherical grid.
The basic idea with this method is that if we could estimate the response function of a single fiber then we could deconvolve the measured signal and obtain the underlying fiber distribution.
In this way, the reconstruction of the fiber orientation distribution function (fODF) in CSD involves two steps:
Estimation of the fiber response function
Use the response function to reconstruct the fODF
Let’s first load the data. We will use a dataset with 10 b0s and 150 non-b0s with b-value 2000.
import numpy as np from dipy.core.gradients import gradient_table from dipy.data import get_fnames, default_sphere from dipy.io.gradients import read_bvals_bvecs from dipy.io.image import load_nifti hardi_fname, hardi_bval_fname, hardi_bvec_fname = get_fnames('stanford_hardi') data, affine = load_nifti(hardi_fname) bvals, bvecs = read_bvals_bvecs(hardi_bval_fname, hardi_bvec_fname) gtab = gradient_table(bvals, bvecs)
You can verify the b-values of the dataset by looking at the attribute
gtab.bvals. Now that a datasets with multiple gradient directions is
loaded, we can proceed with the two steps of CSD.
There are many strategies to estimate the fiber response function. Here two different strategies are presented.
Strategy 1 - response function estimates from a local brain region
One simple way to estimate the fiber response function is to look for regions
of the brain where it is known that there are single coherent fiber
populations. For example, if we use a ROI at the center of the brain, we will
find single fibers from the corpus callosum. The
function will calculate FA for a cuboid ROI of radii equal to
in the center of the volume and return the response function estimated in
that region for the voxels with FA higher than 0.7.
from dipy.reconst.csdeconv import (auto_response_ssst, mask_for_response_ssst, response_from_mask_ssst) response, ratio = auto_response_ssst(gtab, data, roi_radii=10, fa_thr=0.7)
Note that the
auto_response_ssst function calls two functions that can be
used separatly. First, the function
mask_for_response_ssst creates a mask
of voxels within the cuboid ROI and that meet the FA threshold constraint.
This mask can be used to calculate the number of voxels that were kept, or to
also apply an external mask (a WM mask for example). Second, the function
response_from_mask_ssst takes the mask and returns the response function
calculated within the mask. If no changes are made to the mask between the to
calls, the resulting responses should be identical.
mask = mask_for_response_ssst(gtab, data, roi_radii=10, fa_thr=0.7) nvoxels = np.sum(mask) print(nvoxels) response, ratio = response_from_mask_ssst(gtab, data, mask)
response tuple contains two elements. The first is an array with
the eigenvalues of the response function and the second is the average S0 for
It is good practice to always validate the result of auto_response_ssst. For
this purpose we can print the elements of
response and have a look at
(array([0.00139919, 0.0003007 , 0.0003007 ]), 416.7372408293461)
(array([ 0.0014, 0.00029, 0.00029]), 416.206)
The tensor generated from the response must be prolate (two smaller eigenvalues should be equal) and look anisotropic with a ratio of second to first eigenvalue of about 0.2. Or in other words, the axial diffusivity of this tensor should be around 5 times larger than the radial diffusivity.
We can double-check that we have a good response function by visualizing the response function’s ODF. Here is how you would do that:
from dipy.viz import window, actor from dipy.sims.voxel import single_tensor_odf # Enables/disables interactive visualization interactive = False scene = window.Scene() evals = response evecs = np.array([[0, 1, 0], [0, 0, 1], [1, 0, 0]]).T response_odf = single_tensor_odf(default_sphere.vertices, evals, evecs) # transform our data from 1D to 4D response_odf = response_odf[None, None, None, :] response_actor = actor.odf_slicer(response_odf, sphere=default_sphere, colormap='plasma') scene.add(response_actor) print('Saving illustration as csd_response.png') window.record(scene, out_path='csd_response.png', size=(200, 200)) if interactive: window.show(scene)
Saving illustration as csd_response.png
Strategy 2 - data-driven calibration of response function Depending on the dataset, FA threshold may not be the best way to find the best possible response function. For one, it depends on the diffusion tensor (FA and first eigenvector), which has lower accuracy at high b-values. Alternatively, the response function can be calibrated in a data-driven manner [Tax2014].
First, the data is deconvolved with a ‘fat’ response function. All voxels that are considered to contain only one peak in this deconvolution (as determined by the peak threshold which gives an upper limit of the ratio of the second peak to the first peak) are maintained, and from these voxels a new response function is determined. This process is repeated until convergence is reached. Here we calibrate the response function on a small part of the data.
from dipy.reconst.csdeconv import recursive_response
A WM mask can shorten computation time for the whole dataset. Here it is created based on the DTI fit.
import dipy.reconst.dti as dti tenmodel = dti.TensorModel(gtab) tenfit = tenmodel.fit(data, mask=data[..., 0] > 200) from dipy.reconst.dti import fractional_anisotropy FA = fractional_anisotropy(tenfit.evals) MD = dti.mean_diffusivity(tenfit.evals) wm_mask = (np.logical_or(FA >= 0.4, (np.logical_and(FA >= 0.15, MD >= 0.0011)))) response = recursive_response(gtab, data, mask=wm_mask, sh_order=8, peak_thr=0.01, init_fa=0.08, init_trace=0.0021, iter=8, convergence=0.001, parallel=True)
We can check the shape of the signal of the response function, which should be like a pancake:
response_signal = response.on_sphere(default_sphere) # transform our data from 1D to 4D response_signal = response_signal[None, None, None, :] response_actor = actor.odf_slicer(response_signal, sphere=default_sphere, colormap='plasma') scene = window.Scene() scene.add(response_actor) print('Saving illustration as csd_recursive_response.png') window.record(scene, out_path='csd_recursive_response.png', size=(200, 200)) if interactive: window.show(scene)
Saving illustration as csd_recursive_response.png
After estimating a response function for one of the strategies shown above, we are ready to start the deconvolution process. Let’s import the CSD model and fit the datasets.
from dipy.reconst.csdeconv import ConstrainedSphericalDeconvModel csd_model = ConstrainedSphericalDeconvModel(gtab, response)
For illustration purposes we will fit only a small portion of the data.
data_small = data[20:50, 55:85, 38:39] csd_fit = csd_model.fit(data_small)
Show the CSD-based ODFs also known as FODFs (fiber ODFs).
csd_odf = csd_fit.odf(default_sphere)
Here we visualize only a 30x30 region.
fodf_spheres = actor.odf_slicer(csd_odf, sphere=default_sphere, scale=0.9, norm=False, colormap='plasma') scene.add(fodf_spheres) print('Saving illustration as csd_odfs.png') window.record(scene, out_path='csd_odfs.png', size=(600, 600)) if interactive: window.show(scene)
Saving illustration as csd_odfs.png
In DIPY we also provide tools for finding the peak directions (maxima) of the
ODFs. For this purpose we recommend using
from dipy.direction import peaks_from_model csd_peaks = peaks_from_model(model=csd_model, data=data_small, sphere=default_sphere, relative_peak_threshold=.5, min_separation_angle=25, parallel=True) scene.clear() fodf_peaks = actor.peak_slicer(csd_peaks.peak_dirs, csd_peaks.peak_values) scene.add(fodf_peaks) print('Saving illustration as csd_peaks.png') window.record(scene, out_path='csd_peaks.png', size=(600, 600)) if interactive: window.show(scene)
Saving illustration as csd_peaks.png
We can finally visualize both the ODFs and peaks in the same space.
fodf_spheres.GetProperty().SetOpacity(0.4) scene.add(fodf_spheres) print('Saving illustration as csd_both.png') window.record(scene, out_path='csd_both.png', size=(600, 600)) if interactive: window.show(scene)
Saving illustration as csd_both.png
J-D. Tournier, F. Calamante and A. Connelly, “Robust determination of the fibre orientation distribution in diffusion MRI: Non-negativity constrained super-resolved spherical deconvolution”, Neuroimage, vol. 35, no. 4, pp. 1459-1472, 2007.
C.M.W. Tax, B. Jeurissen, S.B. Vos, M.A. Viergever, A. Leemans, “Recursive calibration of the fiber response function for spherical deconvolution of diffusion MRI data”, Neuroimage, vol. 86, pp. 67-80, 2014.
Total running time of the script: ( 1 minutes 29.807 seconds)